Downhole motor

Downhole motor is a king of downhole dynamic drilling tool upon the power of drilling mud.Mud stream from the outlet of mud pump flows through a dump value into the motor. This stream produces pressure loss at both inlet and outlet of the pump,to push the motor into rotating,and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.
We can supply difference types of downhole motor, from 60 to 244mm in diameter, 3.5MPa, 7MPa and 14MPa pressure series, including single lobe and multi-lobe, single bent and double bents motors, which can match different kinds of stabilizers. Chinese manufacturers have the ability to develop a variety of down-hole motors in independence.
The downhole motors manufactured in Chinese mainland have been selling in more than 20 oilfields in China as well as in USA, India, Thailand, Philippines, Iran and Russia.
ability to develop a variety of down-hole motors in independence.
The downhole motors manufactured in Chinese mainland have been selling in more than 20 oilfields in China as well as in USA, India, Thailand, Philippines, Iran and Russ

Drill tool type		5LZ 165×7.0Ⅴ	5LZ 165×7.0Ⅵ	5LZ 172×7.0Ⅳ	5LZ 172×7.0Ⅴ	9LZ 172×7.0Ⅳ	5LZ 197×7.0	9LZ 197×7.0	5LZ 215×7.0	5LZ 244×7.0	9LZ 244×7.0
Hole size	in	8 3/8~9 7/8	8 3/8~9 7/8	8 3/8~9 7/8	8 3/8~9 7/8	8 3/8~9 7/8	9 7/8~12 1/4	9 7/8~12 1/4	12 1/4~15 1/4	12 1/4~ 17 1/2	12 1/4~ 17 1/2
Recommend flow	l/s	20~28	20~28	25~35	25~35	20~30	19~38/58	22~36/55	30~50	50~75	50~75
Drill speed	rpm	90~200	90~200	90~200	90~200	85~160	90~200	85~155	100~200	100~205	75~160
Motor pressure drop	Mpa	4.0	4.8	3.2	4.0	3.2	3.2	3.2	3.2	2.4	3.2
Working torque	N.m	5600	6700	5300	6600;	5200	8500	9000	11000	9000	13000
Output power	Kw	52.8~93.8	63.1~112.3	49.9~88.8	62.2~110.6	43.6~69.1	80.1~142.4	80.1~117.8	115.2~184.3	94.2~155.5	102.1~177
Circulating opening pressure drop	Mpa	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7	1.4~7
Recommend bit load	MT	10	12	8	10	8	16	16	17	18	22
Max bit load	MT	16	16	16	16	16	24	24	28	30	33
Length	mm	7800	8475	6890	7790	6205	8200	8500	8780	7200	7200
Upper end worm	REG	4 1/2	4 1/2	4 1/2	4 1/2	4 1/2	4 1/2	5 1/2	5 1/2	6 5/8	6 5/8
Lower end worm	REG	4 1/2	4 1/2	4 1/2	4 1/2	4 1/2	4 1/2	6 5/8	6 5/8	7 5/8	7 5/8
AKO		0.25°, 0.5°, 0.75°、1°, 1.25°, 1.5°, 1.75°, 2°, 2.25°, 2.5°
DTU		0.6°, 0.75°
FAB		1°×2.5°,1°×0.5°,1°×0.75°,1°×1°,1°×1.25°,1°×1.5°,1°×1.75°,1°×2°,1°×2.25°,1°×2.5°

• 
•