Handing tools

Rotary Slips
Rotary Slips can accommdate drill pipe from 23/8 to 51/2 inch(60.3-139.7mm)O.D.. They are classified as type Short(SDS), Medium(SDML) and Extra Long(SDXL) according to gripping length. SDS slips are designed for shallow hole drilling, SDML slips are the perfect choice for all medium depth drilling, SDXL slips are desinged for deep drilling. There are three kinds of model of DCS Drill Collar Slips:S,R and L. They can accommodate drill collar from 3 inch(76.2mm) to 14 inch(355.6mm) O.D. Casing Slips can accommodate casing from 65/8 to 30 inch(168.3-762mm) O.D.
Safety Clamps are tools for handling flush joint pipe and drill collar. there are two kinds of model of safety clamps. Model WA-C Safety clamps can accommodate pipe from 31/2 to 155/8inch(88.9-396.9mm)O.D Model WA-T Safety Clamps can accommodate pipe from 11/8 to 41/2(28.6-114.3mm)O.D
Model DDZ Center Latch Elevators are suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. The Elevators are designed and manufactured according to API Spec 8A-Specification for Drilling and Production Hoisting Equipment.
Drill collar elevators are hoisting tools for drill collars with zip lift recess and drill collars with lift plugs in oil and gas field. The Elevators are designed and manufactured according to API Spec 8A-specification for drilling and production hoisting equipment.
Slip type elevators are holding and hoisting tools for handling drill pipe,casing, tubing in oil and gas field. They are especially fit to integral joint tubing, non-coupled casing, electric submersible pump and other tubular goods. The elevators are designed and manufactured according to API Spec 8A-Specification for Drilling and Production Hoisting Equipment.
SRE sucker rod elevators are suitable for each size sucker rod in well repairing.It can be adjusted by changing the spacer on the body. The elevators are designed and manufactured according to API Spec 8A-Specification for Drilling and Production Hoisting Equipment.
Type Q86-324/75(33/8-123/4in) manual tong is an essential tool in oil drilling operation to fasten or remove the screws of drill pipe and casing joint or coupling.It can be adjusted by changing latch lug jaws and latch steps.
Type Q340-762/35(133/8-30inch) casing tong is capable of making up or breaking out the screws of casing and casing couplings in drilling operation.
Roller Kerlly Bushings are used for 171/2-491/2 inch rotary tables. They are designed and manufactured according to API Spec 7K
Our company produce the master bushings and insert bowls with the size from 171/2 to 371/2 inch. They are cast with high-quality alloy steel and the sizes conform to API Spec 7K. There are two kinds of type. pin drive and square drive. API standard rotary slip, drill collar slip, casing slip or roller Kerlly bushing can be contained in them.